Your laundry system is the thread that keeps your multitasking schedule tightly stitched. You toss your clothes in the washer with detergent, transfer the clothes to the dryer, and bingo – fresh, clean laundry. If your unit won’t start, your dryer won’t dry clothes, denting the process and shooting you straight into panic mode. What should you do when your Whirlpool dryer won’t start? While a faulty part might be at play, applying DIY remedies with the help of our troubleshooting guide could revamp your routine.
What to Do When Your Whirlpool Dryer Won’t Start
There’s a reason why so many people furnish their units with Whirlpool appliances – they’re efficient, affordable, and reliable. Though owners pin their hopes on the brand’s renowned dependency, even the healthiest machines can break down. From an incorrect setting to an insufficient power source, several factors can cause a dryer to stop working. Let’s surf through some reasons behind why your Whirlpool dryer won’t start along with some quick solutions.
#1. Dryer Is Not Getting Power
Before going too deep into Whirlpool dryer troubleshooting, check if your unit is receiving an adequate power source. Verify that your dryer is plugged directly into the appropriate outlet. While checking, take a quick scan of the cord to confirm it’s not compromised.
Avoid extension cords as they aren’t equipped to handle the power capacity a dryer exhausts. Since a hefty amount of electricity is required to operate your dryer, it may have tripped the breaker when pulling the necessary power.
#2 – Whirlpool Dryer Settings Are Incorrect
Dryer settings protect you and your clothes’ wellbeing now more than ever. It’s possible that you may have accidentally pushed or left a setting in its intended position. If you’re faced with a Whirlpool dryer not starting, confirm that one of these dryer features isn’t at fault.
- Delay Start – This setting allows your dryer to start at a specifically selected time. Press the POWER/CANCEL button to disengage the delay start.
- Controls Locked – Sometimes referred to as a Child Lock and identified by a padlock icon, this setting prevents your unit from starting. To disable this feature, press and hold the CYCLE SIGNAL button for 2-5 seconds until the light above the icon is off.
Image from Reviewed
#3 – Dryer Door Won’t Latch Shut
If you’re still wondering why my Whirlpool dryer won’t start when I push the start button, a precariously closed dryer door could be the reason. Though it may appear shut, it may not be latched. Check first if any clothes are obstructing the door from firmly shutting. If nothing is blocking the door, close the door and listen for a click.
No sign of a click? A faulty latch might be why your Whirlpool dryer doesn’t turn on and needs to get replaced by a technician.
#4 – Whirlpool Dryer Thermal Fuse Failure
Another possibility why your Whirlpool dryer won’t start is a blown thermal fuse. The thermal fuse is a safety feature designed to prevent overheating and is a typical cause of dryer issues. When the thermal fuse blows, the dryer won’t start as a safety precaution to prevent a fire.
Image from Repair Clinic
Check for any clogged vents as they are common sources for a thermal fuse to short out. If nothing is blocking the vents, contact repair to see if a replacement fuse is needed.
#5 – Faulty Dryer Start Switch
An aged START button could be why your Whirlpool dryer won’t start but has power. Push the button while listening for a humming sound from the dryer. If you hear the hum that means the dryer is trying to start, which means the switch probably isn’t the culprit. If no sound emits, consider a replacement start switch. Luckily, the Whirlpool dryer repair team at A-Tech has parts from nearly every make and model so chances are we can switch it out in as little as one visit.
If your unit still won’t start after performing these troubleshooting tips, your issue could be weighed by a defective part. For further repair assistance or dryer maintenance tips, call the pros at A-Tech Appliance Service.