You don’t realize how much you rely on your refrigerator for ice until your ice maker won’t work. Having easily accessible ice is an everyday convenience and great for hosting get-togethers.
But what happens when it fails to do its job? If you ever run into problems with your ice machine, it is important to know what issues to look for.
Ice Maker Won’t Work: Top 4 Reasons
Problems with your ice maker are generally easy to diagnose. To help you find the answer, we made this troubleshooting guide so you can quickly identify and fix the issue:
Water Filter is Clogged
One of the most common reasons an ice maker won’t work is due to a clogged water filter. When clogged, the filter restricts water flow to your ice maker and water dispenser. Consequently, the ice maker won’t fill due to low water pressure.
Replacing the water filter will restore proper water pressure to the ice dispense system. To find the right filter for your refrigerator model, look in the user manual. Refrigerator water filters should be replaced every 6 months to prevent ice maker problems.
Freezer is Too Warm
Ideal freezer temperature range between 0 and 5 degrees Fahrenheit. However, anything above 10 degrees ensures your ice maker won’t work properly. If you find your ice maker slow making ice or making none at all, check the temperature settings of your freezer.
However, if the settings seem fine and you notice food thawing from warmer temperatures, there may be a bigger problem. Check the evaporator coils for frost. Frost accumulation on the coils indicates a failure in the defrost system. In this case, call a professional for refrigerator repair.
Faulty Water Inlet Valve
The water inlet valve controls the water flow to the ice maker and refrigerator water dispenser. The water pressure from the water supply should be at least 20 psi for the valve to function properly.
If the water pressure is sufficient, use a multimeter to test the power supply to the water inlet valve. The valve is faulty if it’s getting adequate water pressure and power but your ice maker won’t fill. In this case, it needs to be replaced to fix the problem.
Defective Ice Maker Module
The ice maker module is a motor that controls the ice assembly cycle. When this part fails, the ice maker won’t fill or release fresh ice. Before assuming the module has failed, troubleshoot other failures first.
It’s easy to accidentally turn an ice maker off so make sure the switch is set the ON position. Also, check the ejector blades for jammed ice if your refrigerator model has them. If the module still won’t dispense ice, then it needs replacement.
If a part needs replacement, contact the professionals at A-Tech Appliance today for your ice maker repair.